About the Journal
Journal of Scientometric Research (J. Scientometric Res.) is an internationally targeted official publication of Phcog.Net. It publishes peer-reviewed articles online in an open access format. It follows the double-blind peer-review process. The journal encourages both empirical and theoretical contributions that advance scientometric research and also reaches out to scholars of science and technology studies (STS), sociology, economics and other related fields that use scientometric data as the ‘object of investigation’ or apply scientometric analysis in innovation and STS studies.
The journal thus publishes articles in all the different domains of scientometrics, including patent studies (techometrics) and web-based studies (webometrics). It also publishes articles that apply science-technology-innovation indicators to draw inasights of country/regional/sectoral research, innovation, and entrepreneurial ecosystem. Papers in areas of contemporary focus such as open science, new tools, and techniques including new approaches for information retrieval, metrics, and new forms of publications among others are encouraged. The journal has various categories in which articles can be submitted, highlighted later in this document.
ISSN: [ISSN: Print -2321-6654, Online - 2320-0059]; Frequency: Rapid at a time publication - Triannual (3 issues/year). Special issues are also published on contemporary areas from time-to-time.
Editor-in-Chief: Prof. Sujit Bhattacharya, Ph.D.
Rapid publication: Average time from submission to first decision is 30 days and from acceptance to In Press online publication is 45 days.
Abstracting and Indexing Information : The journal is registered with the following indexing and abstracting partners:
Scopus, Emerging Source Citation Index (ESCI), EBSCO Publishing's Electronic Databases, Exlibris – Primo Central, CNKI (China National Knowledge Infrastructure), Google Scholar, Hinari, Infotrieve, Journal Guide, National Science Library, OpenJGate, ProQuest, TdNet. The journal is also listed in India’s UGC-CARE List of Journals.
Manuscripts are accepted with the understanding that the authors have not violated any ethical practice followed in preparation and publication of scientific manuscripts. The journal takes a serious view on violations such as of plagiarism, falsification and fabrication of data. Similarity to the published texts should be within the maximum limit of 15%. However, it is the discretion of the journal to reject articles that are within the prescribed limits of plagiarism if it is found that the core aspects of the paper are plagiarised. The list practices that are considered unethical are given on the journal website (www.jscires.org). Author(s) is/are responsible for all the statements made in their work and should be willing to defend them publicly if challenged.
Authors should prepare their manuscripts submitted to the journal exactly according to the instructions given. Manuscripts that do not follow the format and style of the journal may be returned to the authors for revision or rejected. The main text should not have name(s) and affiliation(s) of the authors. The papers will be technically rejected if this is violated. The journal reserves the right to make any further formal changes and language corrections necessary in a manuscript accepted for publication.
The authors are encouraged to check ‘Guide for Authors’ before submitting their manuscripts. Authors can also refer ‘Peer Review Process’ under the heading ‘About the Journal’ in the main menu for further insights.
Disclose all possible conflicts of interest (e.g., funding sources for consultancies or studies of products). Full contact details with postal address(es), phone numbers (mobile & landline), and email IDs (primary & secondary) of the corresponding author must be clearly mentioned. A list of potential reviewers (not exceeding 5) with their email IDs and preferably phone numbers may be included. The suggested reviewers must be working in the same area dealt within the manuscript. Whether to use their services or not is the discretion of the Editor-in-Chief.
Copyright and Open Access Policy
Click to read more on Copyright and Open Access Policy
Copyright undertaking is not required at the time of submission. Copyright form to be submitted only after the paper is accepted.
Copyright form can be downloaded from http://www.jscires.org/content/downloads
*The same form is also available in author submission site
Applicable to all submissions
In each submission, the author(s) should also write on the first page the type of submission, i.e., whether the submitted manuscript is Research Article/ Review Paper/ Perspective Paper/ Research-in-Progress/ Commentary/ Policy Forum/ Book Review/ Webliography).
References: Authors should strictly follow the Vancouver citation style (see for reference: https://www.jscires.org/sites/default/files/ref_style.pdf
The manuscript will not be rejected if the initial submission is not as per the citation style. However, once a Manuscript is accepted, then authors have to strictly follow the above citation style.
The author/authors need to submit a response sheet to the reviewer's comments, which should indicate that all comments raised by the referee(s) have been addressed. Author(s) can choose to differ with the referee comment, however reason for doing so should be properly justified.
Authors need to submit the reply to reviewers's comments using the comment file template. This is available at http://www.jscires.org/content/downloads
*The same form is also available in author submission site
Authors need to submit two files only; one text file and another containing graphs/images/tables. Authors should indicate in the text where they want their figures and tables to be placed. If a paper has three illustrations or fewer, they can be placed in the text also and no separate file then need to be attached.
The journal also accepts articles in LaTeX format.
The research articles are limited to 8000 words. The abstract should be structured and limited to 250 words. The abstract should preferably include these elements: objective, research design and methods, findings, implications and recommendations, contribution and value-added.
Keywords (maximum six in numbers) are to be given, which properly specify the contribution; comma delimitation to be used for separation.
Each article should be structured appropriately. Each article should preferably have the following sections: Introduction, Objectives and Scope of the study, Literature review, Conceptual framework, Methodology, Results, Discussion, and Conclusion. Sub-sections, as required, can be provided.
It is expected that acknowledgements including funding support, if any, to be given by the authors in a separate section ‘Acknowledgement’ before the reference.
Reviews covering topics of current interest are welcome and encouraged. Review articles (not exceeding 10,000 words, cited references to be limited to about 100 in number) are expected to survey and discuss current developments in a field. The review should be well focused and organized, and avoid a general ‘textbook’ style. Review articles will follow the general guidelines of Research Paper.
Perspective paper (up to 5000 words a maximum of two illustrations) invites reflective discussions on recent contemporary research/on tools and methods/new approaches, but do not primarily discuss the author's own work. They may provide a critical synoptic assessment of a research topic including alternative viewpoints/approaches. Perspectives commenting on papers in JSCIRES should add a dimension to the research and not merely be a summary of the study covered in the paper.
The perspective paper will follow the general guidelines of Research papers. The authors may kindly note the other considerations required for publishing in this category. An abstract of up to 150 words should appear on the first page. There is no particular need for authors to include a separate section on methodology.
Aims to encourage and promote research of students/young researchers. This section also provides a platform for established researchers who would like to submit their ‘works in progress’. Contributions go through standard double-blind review. Authors can directly submit as ‘research-in-progress’. However, if reviewers find a paper submitted as an original article has not been sufficiently developed but has promising merit, then the editors take a decision for the paper to be placed as ‘research-in-progress’. The final decision is with the authors of that article, whether they would like their paper to be in ‘research-in-progress’.
The paper limit should be within 3000 words with maximum permissible three illustrations (figure/table). The items of the manuscript should include: (1) Abstracts limited to 200 words; (2) have the choice of including a Methodology section. However, the article must properly inform about the key methods/ procedures in the introduction; (3) Results and Discussion may be combined into a single section. Research in Progress section will follow the general guidelines of Research papers.
Opinion articles relevant to newer developments/issues that would be of significance to the field. Commentary has to be sharp and not descriptive. Abstract, Keywords and Methodology are not required for publishing in this category. The commentary section will follow the general guidelines of Research papers. It has to be within 2000 words.
Encourages submission that draws attention to new tools & techniques, databases, a new methodological approach, new indicators, etc. Papers are expected to use well-constructed case studies for proper demonstration/proof-of-concept of the aspect that is the key focus of their research note. The paper should not be a summary of say tools & techniques; it has to show, for example, how new insights are revealed by using them. The research note should be within 4000 words. Stylized figures, boxes or figures that improve the readability and impact are encouraged. The journal will follow double-blind peer review and other norms as applicable to the research article.
This section is rooted towards contributions that reach out to the policy community at large. It also attempts to emerge as a platform for cross-disciplinary interaction between quantitative and qualitative studies on science-technology-innovation. Thus, papers that apply qualitative and quantitative indicators of STI, including hybrid indicators, engagement of scientometrics in developing a conceptual and methodological approach for science studies, etc. will be encouraged. There is an engaging discourse on open-science, patenting per se that challenges ethical issues, on scientific misconduct and other areas within science and innovation studies that have implications for publication and patenting activity. This section also encourages papers that can address these areas. It will also be of interest that the paper opens up the debate for future discourse on the topic discussed.
Submission should be within 3500 words. Stylized figures, boxes or figures that improve the readability and impact are encouraged. The journal will follow double-blind peer review and other norms as applicable to the research article.
Submission under this section should be between 1200-1500 words. We welcome a review of books/websites on request to be sent to the Book Review Editor Dr Anup Kumar Das (firstname.lastname@example.org). Two copies of the Book to be sent to the Book Review Editor for the book review.
Book Reviews should have a critical assessment of the book drawing attention to its salient aspects, value to the community at large among others. Additionally, the review should see whether the book properly addresses the intended audience, the general scope and subject area, the presentation, clarity, etc. The book review should not be a summary of the book; however, it should have sufficient details and well organized so that readers can have a fair assessment of the book, its merit and drawbacks.
Database/Website reviews should also follow the above criteria.
Instructions for Database Review
Layout of Review:
Title of Database or Service, Publisher’s name and address, name of the reviewer, position, organization, email address, Body of Review, general product description, authority of publication; Scope, content, currency, and intended audience; Bibliographic record format; Search capability: search capability and functionality; Interface: display and navigation, appearance, ease of use, searching options, help screens and output; Search features: basic and advanced search, keyword searching, natural language queries, sorting, pattern matchers, limits, and browsing; Search Results: quality and quantity of records, search history, display of results, and manipulation of search results; Added features: links to full text and URLs, ability to obtain statistics, links to library's OPAC/holdings, thesaurus capability, graphs and image capabilities, and document delivery; Authentication, General limitations; Technical requirements, Suggestions for improvement, Vendor's support, Pricing Options, Contract provisions/options, Comparison with other vendors, Comparison with other databases; Length of review, -- no specific limits but probably within the range of 500-1000 words would be ideal. Feel free to use examples from the text to support your evaluation.
Webliography is broadly defined as a list of electronic documents, websites or other resources available on the worldwide web, especially those related to a particular subject. The journal, through webliography, intends to create a resource base for researchers in scientometrics and related fields. Submission of paper as webliography should be unique or substantially different from prior bibliographies on the topic, and it should be of interest to specific research domains within the scientometrics community including those who are interested in this area of research.
Webliography should be on a particular theme and should be comprehensive in terms of the varied important sources related to the theme that is available on the web.
It is not a research paper and thus should not follow its structure. An introduction should make the readers understand what the webliography is about. Well-defined heading with a proper description in highlighting the resources are expected. The link to the resources should be checked so that they are available to the readers.
Refer to https://www.jscires.org/content/downloads webliography for further clarity.
Welcome comment on research published in JSCIRES and will also include correspondence drawing attention to present academic discourse/issues. As these are meant to express a personal viewpoint, with rare exceptions, preferably should have not more than two authors. Ideally it should be restricted within 500-600 words and are subject to copyediting.
JSCIRES will also cover reports of the conferences and meetings organized by Associations /Societies. The Journal will be interested in considering reports that may be of interest to the readers. These will usually be within 1000 words in length and must be submitted within six weeks of the date of the meeting or conference.
Important e-mail IDs and URLs
- Queries: email@example.com
- Other correspondence: firstname.lastname@example.org
- Chief Editor: email@example.com (Subject Header: Editor-in-Chief)
- Book Review Editor: firstname.lastname@example.org (Subject Header: Book Review Editor)
- Article Submissions: www.journalonweb.com/jscires
- Journal Site: www.jscires.org
Prof. Sujit Bhattacharya
Chief Scientist (CSIR-NISTADS) &
Professor, Academy of Scientific & Innovative Research (AcSIR)
K.S. Krishnan Marg, Pusa campus
New Delhi -110012, India
email@example.com | www.jscires.org